1. Inkqubo ye
umlobothi wakho should be manufactured by a formal professional factory in accordance with the technical conditions and safety specifications of the umlobothi wakho, and the product should have the quality certificate of the manufacturer, otherwise it is not allowed to be used.
2. The new umlobothi wakho should be subjected to a load test, and the opening of the measuring umlobothi wakho should not exceed 0.25% of the original opening.
3.During use, check whether the umlobothi wakho is cracked or severely deformed, corroded and worn.
4. Inkqubo ye
umlobothi wakhokufuneka kuvavanywe kube kanye ngonyaka. Ngexesha lovavanyo, yenza uvavanyo lwe-tuli olungama-1.25 amaxesha omthwalo osebenzayo ovumelekileyo kwimizuzu eli-10, kwaye ujonge kwiglasi yokukhulisa okanye ezinye iindlela. Akufuneki kubekho iintanda, iintanda kunye nokushiyeka okushiyekileyo.
5. Amacandelo amathathu anobungozi kufuneka acocwe ngeparafini. Sebenzisa iglasi yokukhulisa ukuze ubone ukuba akukho zintanda na. Kwipleyiti
umlobothi wakhos, jonga i-bushings kunye nezikhonkwane zokunxiba.
6. Defects on the umlobothi wakho shall not be repaired.